Phlatboyz, LLC: Home Specials http://www.phlatboyz.com Mon, 20 May 2013 00:00:00 EST List of Home Featured Items at Phlatboyz, LLC en-us <![CDATA[Micro Flying Surfer Dude]]> http://www.phlatboyz.com/Micro-Flying-Surfer-Dude_p_32.html Mon, 20 May 2013 00:00:00 EST This item is temporarily out of stock. We expect to have them restocked Mid May. We apologize for the inconvenience. Thank you for your interest. Please check back.Surf the Skies with the Micro Flying Surfer Dude! You will love the way he carves thro...[Read More]
Our Price: $29.95 On Sale [Add to Cart]


]]> http://www.phlatboyz.com/Micro-Flying-Surfer-Dude_p_32.html This item is temporarily out of stock. We expect to have them restocked Mid May. We apologize for the inconvenience. Thank you for your interest. Please check back.Surf the Skies with the Micro Flying Surfer Dude! You will love the way he carves thro...[Read More]
Our Price: $29.95 On Sale [Add to Cart]


]]> Surf the Skies with the Micro Flying Surfer Dude!
"You will love the way he carves through the air. It's like you are surfing the skies."
You will receive:
- Professionally Phlatprinted/Milled 3mm white Depron parts
- Complete Sticker Package
- Carbon Fiber Support Rods
- 160 mAH 1S 30C Battery * Currently out of stock. Temporary price break is included.
- Push Rod Set
- Heat Shrink (for connecting push rod set)
- Complete Shopping Parts List
- Access to Video Build Log
Note: This Kit requires the stickers to be manually cut. We are working on a solution for this and will incorporate it as soon as possible.
Note: This Kit assumes you are familiar with scratch building. Please watch the build log video.
Dealer inquiries and/or bulk orders are welcome. Please contact us for details at phlatboyz@phlatboyz.com
Boardspan: 20" X 6" Board Span
Flying Weight: 1.5 oz Ready to Fly Motor
Size: Ultra-Micro 4-Site (purchased separately)
Prop Size: 130mm X 70mm UM 4-Site (purchased separately)
Speed Control and Servos: Brushed controller and integrated servos on the AR6400L (purchased separately)
Recommended Battery: 1S 160mAh (included in the kit)
Scale: Ultra-Micro
Experience Level: Intermediate
Recommended Environment: Indoor/Outdoor (light to no wind)
Is Assembly Required: Yes
Here is the complete shopping list of the parts you will need to complete this Kit: Spektrum AR6400L DSM2 6 Channel UltraMicro Receiver/ESC http://www.horizonhobby.com/Products/Default.aspx?ProdID=SPMAR6400L
E-flite EFL9051 Prop with Spinner (2): Ultra-Micro 4-Site/Mustang http://www.horizonhobby.com/Products/Default.aspx?ProdID=EFL9051
Parkzone PKZ3616 Motor UM P-51 http://www.horizonhobby.com/Products/Default.aspx?ProdID=PKZ3616
Parkzone Sukhoi Su-26m, Micro P-51 http://www.horizonhobby.com/Products/Default.aspx?ProdID=PKZ3527
DU-BRO Micro Control Horns Cat. No. 848 http://www.horizonhobby.com/Products/Default.aspx?ProdID=DUB848
]]> <![CDATA[Micro PhlatSTANG - P51]]> http://www.phlatboyz.com/Micro-PhlatSTANG--P51_p_34.html Mon, 20 May 2013 00:00:00 EST This item is temporarily out of stock. We expect to have them restocked Mid May. We apologize for the inconvenience. Thank you for your interest. Please check back.The PhlatSTANG is the first of the Micro Phlat Fleet. The Micro Phlatboyz give you all...[Read More]
Our Price: $24.95 On Sale [Add to Cart]


]]> http://www.phlatboyz.com/Micro-PhlatSTANG--P51_p_34.html This item is temporarily out of stock. We expect to have them restocked Mid May. We apologize for the inconvenience. Thank you for your interest. Please check back.The PhlatSTANG is the first of the Micro Phlat Fleet. The Micro Phlatboyz give you all...[Read More]
Our Price: $24.95 On Sale [Add to Cart]


]]> The PhlatSTANG is the first of the Micro Phlat Fleet. The Micro Phlatboyz give you all of the excitement of flying in a small/compact package utilizing the latest in micro technology.

With it's light airframe and unique design, the PhlatSTANG is practically indestructible. You can take these little planez wherever you go. The PhlatSTANG is a blast to fly!

Collect them all and combat with your friendz!
You will receive:Professionally Phlatprinted/Milled 3mm white Depron parts
Complete Sticker Package
Carbon Fiber Support Rods
160 mAH 1S 30C Battery * Currently out of stock. Temporary price break is included.
Complete Shopping Parts List
Access to Video Build Log

Note: This Kit requires the stickers to be manually cut. We are working on a solution for this and will incorporate it as soon as possible.

Note: This Kit assumes you are familiar with scratch building. Please watch the build log video.
Dealer inquiries and/or bulk orders are welcome. Please contact us for details at phlatboyz@phlatboyz.com

Wingspan:

11" Wing Span

Overall Length:

10" Length

Wing Area:

Approx. 54 sq. in.

Flying Weight:

1.4 oz Ready to Fly

Motor Size:

Ultra-Micro 4-Site (purchased separately)

Servos:

Spektrum AS2000L: two integrated on the AR6400L

Prop Size:

130mm X 70mm UM 4-Site

Speed Control :

Brushed controller integrated on the AR6400L (purchased separately)

Recommended Battery:

1S 150mAh

Scale:

Micro

Experience Level:

Intermediate/Advanced

Recommended Environment:

Indoor/Outdoor (light to no wind)

Is Assembly Required:

Yes

Here is the complete shopping list of the parts you will need to complete this Kit:

Spektrum AR6400L DSM2 6 Channel UltraMicro Receiver/ESC http://www.horizonhobby.com/Products/Default.aspx?ProdID=SPMAR6400L

parkzone PKZ3507 Tail Wheel: Sukhoi
http://www.horizonhobby.com/Products/Default.aspx?ProdID=PKZ3507

parkzone PKZ3525 Elevator&RudderPushrod: Sukhoi
http://www.horizonhobby.com/Products/Default.aspx?ProdID=PKZ3525

parkzone PKZ3603 Main Gear Set: UM P-51
http://www.horizonhobby.com/Products/Default.aspx?ProdID=PKZ3603

E-flite EFL9051 Prop with Spinner (2): Ultra-Micro 4-Site
http://www.horizonhobby.com/Products/Default.aspx?ProdID=EFL9051

E-flite EFL9052 Main Motor: Ultra-Micro 4-Site
http://www.horizonhobby.com/Products/Default.aspx?ProdID=EFL9052

E-flite EFL9053 Gearbox with prop Shaft: Ultra-Micro 4-Site
http://www.horizonhobby.com/Products/Default.aspx?ProdID=EFL9053

E-flite EFL9057 Hardware set: Ultra-Micro 4-Site
http://www.horizonhobby.com/Products/Default.aspx?ProdID=EFL9057

]]> <![CDATA[CNC USB Controller]]> http://www.phlatboyz.com/CNC-USB-Controller_p_8.html Mon, 20 May 2013 00:00:00 EST In Stock and Ready to be Shipped!USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors. It uses a USB port which is available on all modern computers and laptops. This is a complete (sof...[Read More]
Our Price: $195.00 [Add to Cart]


]]> http://www.phlatboyz.com/CNC-USB-Controller_p_8.html In Stock and Ready to be Shipped!USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors. It uses a USB port which is available on all modern computers and laptops. This is a complete (sof...[Read More]
Our Price: $195.00 [Add to Cart]


]]> In Stock and Ready to be Shipped!

USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors. It uses a USB port which is available on all modern computers and laptops. This is a complete (software/hardware) solution and it does NOT require any additional software (Mach3 is NOT needed). USB CNC controller is compatible with most step/dir drivers. It has the same pinout as popular PICStep and PMinMO drivers. It can be used as direct replacement for many parallel port break-out boards.

Both the Controller and the Software License are included.

How to activate your License.

Open "License activation" dialog and paste your registration key.


]]> <![CDATA[Phlatformer Kit]]> http://www.phlatboyz.com/Phlatformer-Kit_p_10.html Mon, 20 May 2013 00:00:00 EST The Phlatformer is currently under construction. We are switching over fromthe mdf construction to aluminum. We will be releasing the Open Source design as wellas offering the Parts. Please be patient with us as we work through these exciting changes...[Read More]
Our Price: $299.00 [Add to Cart]


]]> http://www.phlatboyz.com/Phlatformer-Kit_p_10.html The Phlatformer is currently under construction. We are switching over fromthe mdf construction to aluminum. We will be releasing the Open Source design as wellas offering the Parts. Please be patient with us as we work through these exciting changes...[Read More]
Our Price: $299.00 [Add to Cart]


]]> The Phlatformer is currently under construction. We are switching over from
the mdf construction to aluminum. We will be releasing the Open Source design as well
as offering the Parts. Please be patient with us as we work through these exciting changes.
Thank you,
Mark and Trish Carew
Phlatboyz, LLC

The Phlatformer is an inexpensive vacuum forming machine Kit and the newest addition in the growing line of Phlatboyz machines. The stout low profile design makes the Phlatformer perfect for every workshop!

The forming bed is 10" X 10".
The Phlatformer is Featured in Make Magazine!

Check out Make Magazine's full review and build guide here:
http://makeprojects.com/Project/The-Phlatformer/1203/1
The Phlatformer Kit includes:
- Professionally CNC Cut wooden cabinet parts
- All Nuts, Bolts, Screws, Spacers, and Washers
- A Set of Hinges
- Two Magnets for Lid Enclosure
- Three Plastic Pipes, cut to length
- Two Plastic Connectors
- Foil Tape
- High Temperature Adhesive Back Silicone Rubber Seal
- Universal Shop Vac Attachment
- Momentary Power Foot Switch
- Glue, Titebond
- Tape
- 15 Sheets of .020 Polystyrene
- 5 Sheets of .020 PETG

What's not included? The heating source and the vacuum pump are not included. You can check out the Phlatforum for the inexpensive solutions the guyz are using.
What heating source does the Phlatformer use?
Due to liability issues, we chose not to include the heating source with the Phlatformer. While we expected there to be many versions of home-made heat boxes, etc. everyone seems to be using the Rival 11" Skillet. This can be purchased inexpensively from Wal-Mart or Target (about $20)

Shipping time is estimated at 1-7 days.

Phlatboyz, LLC and/or Mark and Trish Carew are not responsible for any damages or injuries that may incur out of the building, using, or owning the Phlatformer. By purchasing the Phlatformer Kit, you agree to these terms

]]> <![CDATA[Turnigy 160]]> http://www.phlatboyz.com/Turnigy-160_p_54.html Mon, 20 May 2013 00:00:00 EST This item is currently out of stock.This battery is perfect for ultra-micro planes and is the one we include in all of our Micro Phlat Kits. Enjoy the power delivered by this little 160mAh battery. You will not be disappointed!You can never have too ...[Read More]
Our Price: $3.99 [Add to Cart]


]]> http://www.phlatboyz.com/Turnigy-160_p_54.html This item is currently out of stock.This battery is perfect for ultra-micro planes and is the one we include in all of our Micro Phlat Kits. Enjoy the power delivered by this little 160mAh battery. You will not be disappointed!You can never have too ...[Read More]
Our Price: $3.99 [Add to Cart]


]]> This item is currently out of stock.

This battery is perfect for ultra-micro planes and is the one we include in all of our Micro Phlat Kits.

Enjoy the power delivered by this little 160mAh battery. You will not be disappointed!

You can never have too many batteries charged and ready to fly so stock up today!

]]> <![CDATA[CNC USB Controller MK2/4]]> http://www.phlatboyz.com/CNC-USB-Controller-MK24_p_202.html Mon, 20 May 2013 00:00:00 EST We have 2 in Stock and Ready to be Shipped!USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors. It uses a USB port which is available on all modern computers and laptops. This is a com...[Read More]
Our Price: $230.00 [Add to Cart]


]]> http://www.phlatboyz.com/CNC-USB-Controller-MK24_p_202.html We have 2 in Stock and Ready to be Shipped!USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors. It uses a USB port which is available on all modern computers and laptops. This is a com...[Read More]
Our Price: $230.00 [Add to Cart]


]]> We have 2 in Stock and Ready to be Shipped!

USB to CNC is now a reality! CNC motion controller is a link between personal computer and drivers for stepper motors. It uses a USB port which is available on all modern computers and laptops. This is a complete (software/hardware) solution and it does NOT require any additional software (Mach3 is NOT needed). USB CNC controller is compatible with most step/dir drivers. It has the same pinout as popular PICStep and PMinMO drivers. It can be used as direct replacement for many parallel port break-out boards.

Both the Controller and the Software License are included.

Features and specifications:
  • USB (V2.x) from PC/Laptop running Windows XP, Vista or Windows 7 (32 bit or 64bit)
  • motor driver connector pin-out is compatible with 10 pin open source interface
  • controller works with most step/dir stepper and servo motor drivers available on the market
  • buffered IO for maximum performance
  • advanced interpolation algorithms
  • start, stop, pause and resume execution of program on your machine
  • standard RS274/NGC G-code (EMC2 compatible)
  • advanced G-codes - G40, G41, G42 (Cutter Radius Compensation) supported
  • advanced G-codes - G43, G49 (Tool Length Offsets) supported
  • advanced G-codes - G54, G59.3 (Coordinate System Origins) supported
  • tested with SolidCAM, MasterCAM, ArtCAM, Vectric, CamBam, MeshCAM ... generated G-code
  • Profili 4-axes and 3-axes G-code supported
  • import toolpath from DXF files
  • import toolpath from PLT/HPGL files
  • import toolpath from image files
  • import toolpath from NC-Drill (Excellon) files
  • import toolpath from Gerber (RS-274X) files
  • toolpath simulation
  • automatic homing procedure
  • advanced toolchange procedures
  • automatic tool length measuring
  • export toolpath to G-code
  • export toolpath to DXF
  • SDK (software developers kit) is available
  • works on MacOS X (Snow Leopard 10.6.3) with virtual machine emulating Windows XP SP3
  • 100 kHz maximum step frequency
  • 3 digital outputs
  • 12 us minimum pulse width
  • manual jog inputs for all axes
  • limit inputs
  • 4 inputs
  • screw terminal connectors for all inputs & outputs
  • DB25 connector (simulates PC LPT parallel port for easy connection to existing systems)
  • transformation matrix
How to activate your License.

Open "License activation" dialog and paste your registration key.


]]>